Butt Weld Fitting is helpful to attach pipes from its ends that amendment the direction or diameter of the pipe. A standard Butt Weld Fitting has one or additional welds as per its dimension, producing method and form. Butt fastening could be a technique to link components while not extra tools that don’t overlap and area unit parallel to every different. This technique helps within the continuous running of a machine. Beveling of the ends of butt weld fittings ends up in prodigious in wall thickness by 4mm in solid solution stainless-steel and five millimeter in ferritic stainless-steel. These bevels help to make “Butt-Weld”. Generally, Butt Weld Fitting making takes place by heating two weld ends using a weld plate and joining it again in a specific pressure. Later, the outputs are ground down to give a smooth finishing. To make a seamless butt weld fitting, you need to heat a section of seamless pipe material and add pressure to convert the pipe into an elbow. The Butt weld is a product of using an arc or MIG welder. Also, brazing helps in making this. When butt weld is complete using the arc welding, the weld is to be hit with a hammer so that the slag releases before applying further welds. The weld is inexhaustible when using MIG Welder which is coated with copper wire. Duplex Supply, Inc incorporates an immense stock of Butt Weld Fitting. We have a tendency to conjointly embrace seamless butt weld fittings, starting from ½ inch to twelve inches and welded butt fastening fittings from ½ to twenty four inches. Also, we’ve got a schedule vary from 5S to 169 schedules.

The diameter and wall thickness of pipe fittings are as per the North Yankee commonplace and is Nominal Pipe Size (NPS). The international commonplace Diameter Nominal (DN). All the fittings begin from ½ inch to 12-inch “Nominal Pipe Size”, whereby outer diameters are larger than marked size and cause shortening of within diameters once schedules grow. Advantages of Butt Weld Fitting over Flanges To connect pipe exploitation butt weld fittings, you wish to weld them, whereas on the opposite aspect, to attach pipe exploitation flanges you wish to bolt them along. Butt Weld Fitting want 10-75% less material as per its size whereas flanges need less. Butt Weld Fitting provides swish flow while not sharp corners, creating no resistance, no pressure loss and fewer turbulence.

Get in Touch..! We'd Love to hear You..
Materials and Specifications to provide Butt Weld Fitting
  • Materials used are- solid solution untainted Steels, Duplex or Super-duplex.
  • Standards: ISO, ANSI/ASME, MSS, JIS, DIN, BS etc.
  • Range: 1/2”-48” inches.
  • Thickness: STD, XS, XXS.SCH10, 20, 30, 40, 60, 80, sixteen schedules.
  • Alternative Specifications: Cold fashioned, beveled ends, treated and quenched to ANSI B16.25.
  • Hardness to NACE MR0175 – latest edition
  • Certified to nut 10204/3.1 and ASTM A262E and PMI tested

Duplex Supply is legendary for the Butt Weld Fitting manufactures. In fact, we offer a varied vary of Butt Weld Fitting that guarantee you a high level of strengths. Together with that, our Butt Weld Fitting will match into any dimension as they’re on the market in several shapes and sizes. Moreover, they’re most sturdy and are at pocket-friendly costs. Alternative forms of Butt Weld Fitting that Duplex Supply produces embrace seamless butt weld fittings, industrial butt weld fittings, stainless-steel butt weld fittings, steel Butt Weld Fittings, steel and duplex steel butt weld fitting.On the opposite hand, we have a tendency to toll-known for Tee butt weld fittings that we turn out as Equal Tee and Unequal Tee. Stainless-steel, steel, and steel are accustomed manufacture Tees to attach totally different diameters of pipes. Nice endurances, the accuracy of dimensions, the resistance to corrosion, sturdiness and crowning glory, Duplex Supply’s Butt Weld Fitting are the foremost demanded within the market.

Types of Butt Weld Fitting
  • Long Radius Elbows 90º
  • Long Radius Elbows 45º
  • Short Radius Elbows 90º
  • End caps
  • Concentric Reducers
  • Eccentric Reducers
  • Short Length Stud Ends
  • Equal Tees
  • Reducing Tees

Applications of Butt Weld Fittings:
  1. Wide utilized in chemical industries, construction sectors, construction industries, oil and gas industries, power plants, heat energy, etc.
  2. Conjointly utilized in food and potable productions from traditional instrumentation to elaborating deserts.
  3. Helpful in chemical process of plants into remodeling H2O into drinking for drought prone areas.
  4. For the assembly of medicines, vaccines, pharmaceutical and biotech merchandise.
  5. Additionally, helpful within the production of semiconductors like microchips, pulp-paper production, construction materials, plastics, roofing materials, etc.

Another North Yankee commonplace known as Schedule (sch) is that the wall thickness unit for a pipe fitting. To resist vast pressure, industries like shopping for fittings with high schedules that offer them thicker walls. The quality units are typically SCH five, 5S, 10, 10S, 40, 40S, 80, 80S, 100,140, 160, STD, XS and XXS. Yield strength is that the ability of materials to handle a pressure while not damaging itself. Hence, yield strength determines the fittings style.

Difference between a 3R and a 3D elbow

3R and 3D even have no distinction at intervals them. Every of them encompasses a 3x time’s center line than the nominal diameter size. Also, they need sleek curves as compared to SR and LR. The diameter and variety preceding it assist you calculate the center line radius. But yes, there’s a significant distinction within the coaxial reducers and also the eccentric reducers. 1st and foremost, the coaxial reducer is symmetrical whereby each ends are bend within the center. Whereas the eccentric reducer isn’t in the slightest degree symmetrical, which suggests the ends don’t meet at the middle. Also, you want to understand that lateral pipe fittings are useful to divide one line into 2 wherever the second line meets at 45-degree angle.

Tips on protective Butt Weld Fittings:
  1. Wide utilized in chemical industries, construction sectors, construction industries, oil and gas industries, power plants, heat energy, etc.
  2. Conjointly utilized in food and potable productions from traditional instrumentation to elaborating deserts.
  3. Helpful in chemical process of plants into remodeling H2O into drinking for drought prone areas.
  4. For the assembly of medicines, vaccines, pharmaceutical and biotech merchandise.
  5. Additionally, helpful within the production of semiconductors like microchips, pulp-paper production, construction materials, plastics, roofing materials, etc.

Another North Yankee commonplace known as Schedule (sch) is that the wall thickness unit for a pipe fitting. To resist vast pressure, industries like shopping for fittings with high schedules that offer them thicker walls. The quality units are typically SCH five, 5S, 10, 10S, 40, 40S, 80, 80S, 100,140, 160, STD, XS and XXS. Yield strength is that the ability of materials to handle a pressure while not damaging itself. Hence, yield strength determines the fittings style.

Dimensions and Fitting Sizes of Butt Weld Fittings

The diameter and wall thickness of pipe fittings are as per the North Yankee commonplace and is Nominal Pipe Size (NPS). The international commonplace Diameter Nominal (DN). All the fittings begin from ½ in. to 12-inch “Nominal Pipe Size”, whereby outer diameters are larger than marked size and cause shortening of within diameters once schedules grow.

Advantages of Butt Weld fitting over Flange
To connect pipes exploitation butt weld fitting, you wish to weld them whereas on the opposite aspect, to attach pipes exploitation flanges you wish to bolt them along. Butt Weld Fitting want 10-75% less material as per its size whereas flanges need less. Butt weld fitting provide swish flow while not sharp corners creating no resistance, no pressure loss and fewer turbulence.