When performing with seriously significant pressure pipes having very little size, we’d like Socket Weld Fittings. Though they are a similar as vesture projection, Socket Weld fittings projection carries with it an embowered internal or enclosed recess inside its diameter that ensures sleek flow. Moreover, the key advantage of Socket Weld Fittings is that with correct fastening and grinding, it makes sleek bore. However, a Socket welds unit of measurement sold-out at high worth as they have Byzantine machining. Then, Socket Weld Fittings were created with an intention for usage in hard-hitting areas at little pipes.Duplex Supply has the foremost effective warehouse facilities that have an oversized stock of Socket Weld Fittings ready to ship and unit of measurement offered altogether dimensional inches. On the other hand, we have a tendency to tend to boot furnish flanges with 1/16’’ raised face once given by customers. Completely different flat face selections are offered and furnishing of normal Bore is to boot done. As a matter of truth, we have a tendency to tend to boot offer Socket Weld Fittings in varied materials like alloy, stainless-steel, steel and lots of another output that Duplex Supply manufactures is Socket Weld Fittings projection. This sort of fitting permits you to rotate outer fittings merely as they’re obtainable in an extremely two-piece. Hence, providing you with straightforward bolt hole alignments. We have a tendency to tend to boot produce one piece socket weld insert fitting if asked for accurately, the two-piece Socket Weld fitting incorporates a dimension of DN15 – DN2000 (1/2″ – 80″). Socket Weld fittings projection has a fatigue strength of doubly the double-welded assume the projection. Of course, confine the mind to form a region between fitting and pipe before fastening. This may facilitate shrink stress at the weld root.

Types of Socket Weld Fittings by class, Size and Wall Thickness
  • Category Designation- 3000 Lbs., 6000 Lbs., 9000 Lbs.
  • Elbows 45 degrees, Elbow ninety degrees, Tees, Crosses, Couplings, Half-Couplings, end or Pipe Caps all ranging from ½ – four to ½ – 2 to ½ – 2.
  • Pipe Size (by Wall Thickness) – SCH eighty & XS, SCH 160, XXS
  • Plugs and Bushings unit of measurement dried-up through class 6000 NPS
Fittings Types Standards Designation
  • stainless-steel Fittings- ASTM A182 F304 / 304L / 304H / 316/ 316L / 321 / 310 / 347 etc.
  • Steel Fittings- ASTM A105 / A694 F42/ 46/ 52/56/ 60/ sixty 5 / seventy / A350 LF3 / A350 LF2, etc.
  • Steel Fittings- ASTM A182 F1 / F5 / F9 / F11 / F22 / F91 etc.
  • Alloy Fittings- ASTM B 366, etc.

To attach this Socket Weld fittings, foremost insert the pipe among the Socket end and at the very best aspect unfold the fillet weld. Further, this offers a sleek flow among the pipe. Duplex Supply is that the manufacturer and supplier of Socket Weld Fittings that’s accessible in varied sizes, material grades, and specifications. Above all, our company collectively produces fittings with a hub that has given vary starting from 1/2’’ via 24’’. In fact, they are volume flat face, raised face with 1/16’’ or RTJ faces, our Socket Weld Fittings unit attainable in carbon, steel, stainless-steel and alloy Socket Weld Pipe Fittings.

Get in Touch..! We'd Love to hear You..
Material Specification of Socket Weld Fittings
  • Size: 1/4″-4″, DN8-DN100.
  • Pressure at America Series: class 100 fifty, Class 300, Class 600, Class 900A, Class 1500, Class 2500.
  • Pressure at Europe Series: PN2.5, PN6, PN10, PN16, PN25, PN40, PN63, PN100, PN160, PN250, PN32, PN400.
  • Projection Facing types at America Series: female (F), Male (M), Tongue (T), Groove (G), Flat face (FF), Raised face (RF), Ring kind joints face (RJ/RTJ).
  • Projection facing types at Europe Series: kind A(Flat Face), kind D(Groove), kind B(Raised Face), kind C(Tongue), kind E(Spigot), kind H(O-Ring Groove), kind F(Recess), kind G(O-Ring Spigot).
  • Material: – Carbon steel: ASTM A105, C22.8, ASTM A105N, and GB 20. Alloy steel: ASTM/ASME A182 F1-F12-F9- F91- F11-F22- F5. Unstained steel: ASTM/ASME A182 F304-304N-304L-304H-304LN, ASTM/ASME A182 F347-347H, F321-321H, ASTM/ASME A182 316LN-316N-316Ti, F316-316L-316H.
  • Low-temperature steel: ASTM/ASME A350 LF2.
  • High performance steel: ASTM/ASME A694 F42, F52, F56, F60, F65, F70.
  • Standard-ASME ANSI B16.5, CSA Z245.12, EN1092-1, EN1759-1, ASME ANSI B16.47. API 605, API 6L. MSS SP 44, DIN2630, DIN2631, DIN2632, DIN2633, DIN2637, DIN2638, DIN2634, DIN2635, DIN2636, BS1560, ISO7005-1, AS2129, JIS B2220, BS4504, BS10, AFNOR NF E29-200-1.

Socket Weld Fittings

  • Applicable for lines, conveyance of title flammable, high-ticket or unhealthful material for steam 300 to 600 PSI with no leaks.
  • Useful in conjunction with ASME Pipe and unit accessible among identical size vary.
  • Usage in space units of permanent pipework and are designed to supply sensible flow characteristics.
  • Their unit created too several ASTM standards and are ready-made in accordance with ASME B16.11.
  • They are accessible in three pressure ratings: 3000lbs, 6000lbs, and 9000lbs
  • Method plant for component, element and acid acids, Pulp and paper method.
  • Elements in gas cleanup plants and H2O cooling instrumentation
  • Plant elements and Wires in static precipitators.

In my opinion, the intention of bottoming clearance in an exceedingly Very socket weld fittings is just to decrease the residual pressure at the idea of the weld which is able to begin whereas the continued technique of activity of the fastening metal.

Pros:

  • No beveling of the pipe is vital before fastening.
  • Any temporary tack fastening is not necessary for alignment as a result of the rim ensures sensible alignment.
  • The bore of the pipe doesn’t let weld metal penetrate into itself.
  • Prospects of the leak unit less if replaced to string fittings.
  • Prevents radiography victimization its fillet.
  • Budget friendly construction expenses as they match specifically so no special tools and installments.

Cons:

  • The necessity of enlargement gap of 1/16 in. Between the socket shoulder and additionally the pipe.
  • The presence of crevices and gap can cause corrosion.
  • Not applicable for extremist High hydraulics Pressure as they don’t alter complete penetrate.

The packing of socket weld fittings is according to international standards and in strapped bundles with stripes, followed by transferring into containers to avoid injury. Our delivery days may take 10-25 days (depends on the stock and area of shipment). Additional packing is in polygon bundles, picket boxes, steel or picket crates and in addition per customers demand. Moreover, plastic covering is given to each bundle to avoid weather injury. Also, Plastic cap unit given at the ends of Socket Weld Pipe Fittings. Next, our things have marks that act as distinctive identifiers. Our regular merchandise countries embrace European country, UAE, Bahrain, Indonesia, Australia, Kuwait, Asian nation, Republic of South Africa, Germany, UK, Denmark, Canada, USA, Peru, Brazil, Nigeria, Mexico, Republic of Republic of Venezuela (Latin America), South America, Russia, state etc.

  • All our fittings are unit in accordance with ANSI B sixteen.5 from 1/2″ to 24″ and classes 100 and fifty to 2500.
  • Fittings in accordance with MSS SP forty four commonplace ranging from 26″ to 48″ and classes 100 and fifty to 900 lbs. are accessible.
  • Fittings with long fastening neck of sizes from 1/2″ to 24″ and unit from classes 100 and fifty to 2500 lbs.
  • Gap fittings are unit in accordance with ANSI B16.36 from 1″ to 24″ and from 300 to 2500 lbs.
  • Blind fittings are unit from half a dozen Bar to forty Bar in accordance with DIN then are unit placed on and fastening neck fittings.
  • Fittings in accordance with BS10 Table D & Table E, Bachelor of Science Table F & Table H, and Bachelor of Science Table J & Table K unit in from 1/2″ to 24″ and up to 450 lbs.
  • Fittings from 2kg to 210 metric weight unit in accordance with JIS.

We aim to be the forefront of innovation in output production lines and sales services. In addition to that, we’ve a routine to upgrade product and services to permit the U.S. to satisfy the market levels, expectations, and demands.